electronica 2026: The Cellular IoT, Antenna and eSIM Exhibitors Worth Your Time in Munich

electronica 2026 runs at Messe München from 10 to 13 November. Peter Green picks out the cellular IoT module, antenna and eSIM exhibitors worth finding in the 18 halls, what they are showing, and why engineers still make the trip.

Cellular IoT modules, antennas and eSIM chips on display at an electronics trade fair, representing electronica 2026 in Munich
Quick answer: electronica 2026 runs at Messe München from 10 to 13 November. Peter Green picks out the cellular IoT module, antenna and eSIM exhibitors worth finding in the 18 halls, what they are showing, and why engineers still make the trip.

electronica 2026 is under way at Messe München, running from 10 to 13 November, and if you build anything with a cellular modem in it, the bit of the show you care about is smaller than the brochure suggests. Around 3,500 exhibitors, all 18 halls, SEMICON Europa running alongside. Most of it is power semiconductors, passives, connectors and test kit. Tucked inside all that is a solid core of cellular IoT module makers, antenna specialists and eSIM people, and that’s what this piece is about: who’s there, what they’re showing, and why engineers still bother getting on a plane for it.

The short version: head for Hall C2 first. That’s where Quectel, SIMCom, Taoglas and Cavli Wireless are all within a few minutes’ walk of each other, along with a live demo of eSIM profiles being loaded on the production line. u-blox is over in C4. Nordic, Sequans and Fibocom are all at the show too. The themes worth asking about are LTE Cat 1 bis, 5G RedCap moving into routers, factory-loaded eSIM, satellite NTN in mainstream LPWA silicon and the Cyber Resilience Act.

Why people still go to electronica

I’ll be honest about what electronica is and isn’t. It isn’t a buyers’ show for someone wanting to pick up a few routers. It’s a design-in show. The people on the module and antenna stands are field application engineers and product managers, and the people walking the aisles are mostly hardware engineers, buyers from contract manufacturers and product owners trying to decide what goes on their next board.

That’s exactly why it’s worth the trip for anyone designing cellular devices. In my experience the useful conversations at a show like this are the ones you can’t have from a datasheet:

  • Roadmaps and end-of-life dates. Which module is going to be around for ten years, and which one quietly disappears after three. Product managers will tell you things face to face that never make the website.
  • Side-by-side comparisons. Four Cat 1 bis modules from four vendors in one hall in one afternoon is worth weeks of emails.
  • Antenna integration before certification, not after. Most cellular projects that slip do so in RF, and an hour with an antenna engineer and your enclosure drawing is the cheapest insurance going.
  • Samples and evaluation kits. Still the easiest way to get hardware on the bench quickly.
  • The ecosystem in one place. Modules, antennas, eSIM, test houses and distributors under one roof, so you can follow a design question from silicon to network without waiting a week for each reply.

The numbers explain the pull. The organiser says the 2024 edition drew more than 3,480 exhibitors and over 80,000 visitors, and this year’s billing is again around 3,500 exhibitors from about 60 countries. The headline themes for 2026 are artificial intelligence, cyber resilience and energy efficiency, under the show’s “All Electric Society” banner. For our corner of the industry, the IIoT Forum covering AI, machine learning, 5G and edge computing is the stage to keep an eye on.

Cellular IoT module makers at electronica 2026

Quectel

Quectel says it’s at the show for the whole four days with its modules, antennas and certification services. Third-party exhibition listings put it on Hall C2, stand 601. Quectel is the default first stop for a lot of engineers simply because of the breadth of the range, and the certification services are the bit I’d ask about. Getting a module certified is one thing. Getting your finished product through operator and regulatory approval is where the time goes.

SIMCom

SIMCom has published its stand as C2.506. Its recent focus has been Cat 1 bis, and it has been loading SGP.32 firmware onto its Cat 1 bis modules, which is exactly the kind of thing you want confirmed in writing for the specific part number you’re designing in. SIMCom has also been talking up LTE450 for smart energy utilities this year, which is worth a conversation if you work anywhere near metering.

Cavli Wireless

Cavli is in Hall C2 on booth 628 and is using the show to launch the P16QS, an LTE Cat 1 bis system-on-module in a 40 x 30 mm package that adds Wi-Fi 6, Bluetooth LE 5.4, a secure element and interfaces for NFC and card readers, with GNSS and an integrated eSIM as options. It’s also showing 5G router prototypes built on its CQM220 RedCap and CQM211 5G NR modules, and demonstrating its Hubble platform, which covers eSIM lifecycle management, remote AT command access and firmware updates over the air. Cavli is also launching Cortex AI, an assistant for writing firmware. I’d want to see that working on a real project before I got excited, but the router prototypes are the more interesting signal: RedCap is moving from slides into actual boxes.

Fibocom

Fibocom used the show to launch its SC236 smart module, built on the Qualcomm Dragonwing Q-2390, combining connectivity with an on-board processor and GPU for devices that need to run applications locally. Fibocom says mass production is planned for the fourth quarter of 2026. Smart modules aren’t for everyone, but if you’re building a terminal, a kiosk or a camera with a modem in it, it’s a different conversation from a bare data modem.

Nordic Semiconductor

Nordic lists electronica 2026 on its events calendar. Its cellular story this year has been a big one: the nRF9151 gained satellite NTN support and Skylo certification for its LTE-M and NB-IoT module, the nRF93M1 brings it into Cat 1 bis, and the new nRF92 Series adds edge AI processing alongside LTE-M, NB-IoT and NTN. Nordic has also said it is working with lead customers on 5G eRedCap. If you’re building battery-powered trackers or sensors that need to stay connected in places the mast never reached, that’s the conversation to have.

Sequans

Sequans lists electronica among its events this autumn. It showed its Monarch 3 and Calliope 3 eRedCap platforms at MWC earlier in the year, so if eRedCap is on your roadmap, this is a chance to ask how close it really is to production silicon.

u-blox

u-blox is in Hall C4, booth 480, these days focused on positioning and short-range radio rather than cellular. It’s worth a visit if your cellular device also needs GNSS, because it’s debuting a new positioning product line here, showing its ALMA-W1 Wi-Fi 6 and 6E modules built on Nordic technology, and talking about its PointPerfect Flex correction service.

Antennas and RF: where projects actually slip

I’ve said it before and I’ll keep saying it: the modem is rarely what goes wrong. It’s the antenna, the cable, the ground plane, or the metal box somebody chose because it looked nice. If you only have time for one non-module stand, make it an antenna one.

Taoglas

Taoglas is in Hall C2, booth 516, showing RF, GNSS and antenna products and its AntennaXpert tools, including an AI-driven antenna recommendation engine that it says can take you from requirements to a validated shortlist in minutes. Its head of engineering, Baha Badran, framed the challenge as engineers being asked for more wireless capability in less space. That’s true of nearly every cellular product I see. Take your enclosure drawing and your PCB layout and ask the hard questions about coexistence and certification readiness while you’ve got an engineer in front of you.

Infinite Electronics

Infinite Electronics is in Hall A3, stand 241, with its group companies including Pasternack, L-com and Bulgin. Less about embedded antennas, more about the RF cabling, connectors and external antennas that sit between a router and a mast. That’s the unglamorous end of the job, and on a lot of sites it’s the end that decides whether the thing works.

If antennas are your thing, we go into far more depth on iotantenna.co.uk, and our piece on underground IoT connectivity and antennas shows what happens when RF meets the real world.

SIM and eSIM: connectivity becomes a production setting

The eSIM demo I’d make a point of seeing is on Hall C2, stand 601. Acceleronix, IDEMIA Secure Transactions and Orange are running the first live demonstration of their in-factory profile provisioning programme, IFPP for short. The idea is simple and, for anyone who has ever managed SIM stock for several countries, very attractive: build one product for every market and load the operator profile on the production line before it ships, so the device joins the network on first power-up.

Acceleronix supplies the loader and factory tools that plug into existing production lines, IDEMIA supplies the eSIM with what it calls quantum-safe profile binding, and Orange supplies the profiles and the connectivity. The programme follows GSMA SGP.41, the framework for in-factory provisioning, runs on existing SGP.32 infrastructure, and the partners say OEMs can move to SGP.42 once its detailed specification is published. Visitors can also sign up for a trial kit to test it on their own line.

My take: factory provisioning solves a real problem, but it moves a decision, it doesn’t remove one. Somebody still has to choose the first operator profile, and you still need the device in the middle to handle profile changes properly later on. I wrote about that in the SGP.32 readiness chain. Ask every vendor on this stand, and every module maker in the hall, exactly which SGP.32 and SGP.41 functions their firmware supports today, not on the roadmap.

For the deeper standards detail, sgp32.co.uk and euicc.co.uk cover the specs term by term, and our IoT eSIM glossary entry is a decent place to start if the acronyms are getting away from you.

Who’s where: cellular IoT at electronica 2026

ExhibitorWhereWhat to look at
QuectelC2.601 (per exhibition listings)Cellular modules, antennas, certification services
Acceleronix, IDEMIA Secure Transactions, OrangeC2.601Live in-factory eSIM provisioning (IFPP), SGP.41, trial kits
SIMComC2.506Cat 1 bis, SGP.32 firmware, LTE450
TaoglasC2.516Antennas, GNSS, RF, AntennaXpert tools
Cavli WirelessC2.628P16QS Cat 1 bis SoM, RedCap router prototypes, Hubble platform
u-bloxC4.480New positioning line, ALMA-W1 Wi-Fi, PointPerfect Flex
Infinite ElectronicsA3.241RF cabling, connectors, external antennas
FibocomCheck the show appSC236 smart module
Nordic SemiconductorCheck the show appnRF9151 with NTN, nRF93M1 Cat 1 bis, nRF92
SequansCheck the show appeRedCap platforms

Stand numbers come from each company’s own announcements unless marked otherwise. Check the official exhibitor directory or the electronica app before you set off across the halls, because things move.

The questions I’d take to every stand

Five themes run through this year’s cellular stands, and they make a handy checklist.

  1. Cat 1 bis. It has become the workhorse for devices that need more than LTE-M but don’t need full LTE, and it’s where a lot of 2G and 3G replacement work is landing. Ask about single-antenna performance in your enclosure, not just on the evaluation board.
  2. RedCap and eRedCap. RedCap is turning up in real routers. eRedCap is still mostly roadmap. Ask which bands, which networks it has been tested on, and when it’s genuinely in volume. Our explainer on 5G RedCap for industrial IoT and eredcap.com have the background.
  3. eSIM. Which SGP.32 functions are in the firmware today, which eIMs it has been tested with, and whether factory provisioning is supported.
  4. Satellite NTN. It’s now in mainstream LPWA silicon. Ask which satellite services it’s certified on and what it does to your power budget.
  5. Cyber resilience. It’s one of the show’s headline themes for good reason. The EU Cyber Resilience Act’s reporting obligations apply from September 2026 and the main requirements from December 2027. Ask module makers what they’ll give you on vulnerability handling and update support, because a lot of that responsibility lands on you as the product maker. I set out who’s responsible for what in who secures the router in the cabinet.

Practical bits: the organiser lists opening hours as 09:00 to 18:00 Tuesday to Thursday, with a shorter day on Friday. Visitor tickets also get you into SEMICON Europa, and students and pupils get in free on the Friday. Book meetings in advance if you want a product manager rather than whoever is free, and take your enclosure drawings and bill of materials with you. The organiser’s own advice is to wear comfortable shoes, and for once I can’t argue with the marketing department.

Quick answers

When and where is electronica 2026?

electronica 2026 runs from 10 to 13 November 2026 at the Trade Fair Center Messe München in Munich, Germany. It takes up all 18 halls, with SEMICON Europa running in parallel.

Which hall has the cellular IoT exhibitors at electronica 2026?

Hall C2 holds most of the cellular IoT stands, including Quectel, SIMCom, Taoglas and Cavli Wireless, plus the Acceleronix, IDEMIA and Orange eSIM provisioning demo. u-blox is in Hall C4.

Is electronica worth attending for IoT connectivity?

Yes, if you design cellular devices. It’s a design-in show, so the value is in talking to application engineers about modules, antennas, eSIM and certification, comparing vendors side by side and getting samples. It’s less useful if you just want to buy finished routers.

What is in-factory eSIM provisioning?

It means loading an operator profile onto a device’s eSIM on the production line, so one product can be built for every market and connect from first power-up. The GSMA framework for it is SGP.41, and Acceleronix, IDEMIA and Orange are demonstrating it live at electronica 2026.

How often is electronica held?

Every two years in Munich. productronica, the electronics manufacturing show, takes the years in between.